Theroleofcapacitance.docVIP

The role of capacitance The filter: mainly used for direct current road, the introduction of the filter capacitance reason is to obtain smooth stable voltage, because capacitance on both ends of the voltage cant mutations, so it can restrain voltage fluctuations, make voltage become stable smooth. 2. Its decoupling: also called back coupling, the main function have two: 1, remove the communication between the device rf coupling. It can of device in the instant of peak power of short circuit, burr off. In theory, the higher the frequency, the smaller the need to its decoupling capacitor. 3. Bypass: bypass capacitors is the role of loop of the ac signal dont need to fall to short circuit. \ Filtering, by-pass and its decoupling is refers to the capacitance parallel in a circuit? Coupling is refers to the capacitance in series circuit? That theory not wrong, but almost no one to say so. Coupling capacitance in when of course is in series in the circuit, if it connected in parallel between devices, so what exactly is who and who coupling? A roll of course is connected in parallel at both ends of the device, marked: power supply end and the ground, in the specific application of capacitance will try to remember the close to the power source, its decoupling effect is good, this is experience. Bypass is generally the resistance and capacitance parallel together, and then in a loop of the series, usually so used. 1, application in power supply circuit, realize the bypass, to lotus root and filter and energy storage effect, the classification provide details: 1) bypass Bypass capacitors is provide the energy for the local device of energy storage device, it can make the voltage stabilizer output uniformity, reduce the load demand. Like small rechargeable battery, bypass capacitors can be charge, and to the device for electric discharge. To minimise impedance, bypass capacitors to get near the power supply power supply pipe load components to tube feet and feet. This is abl