TheUser-DefinedGasModel.docVIP

Overview and Limitations of the User-Defined Real Gas Model The user-defined real gas model (UDRGM) has been developed for the?FLUENT?coupled solvers to allow you to write your own custom real gas model to fit your particular modeling needs. The UDRGM requires a library(库) of functions written in the C programing language. Moreover, there are certain coding requirements that need to be followed when writing these functions. Sample real gas function libraries are provided to assist you in writing your own UDRGM. When UDRGM functions are compiled, they will be grouped in a shared library which later will be loaded and linked with the?FLUENT?executable. The procedure for using the UDRGM is defined below: 1.Define the real gas equation of state and all related thermodynamic and transport property equations.(定义实际气体状态方程，并且给出所有相关的热力学Create a C source code file that conforms to the format defined in this section. （创造一个符合本节所定义的C的源代码文件。） 3.Start?FLUENT?and set up your case file in the usual way. 启动FLUENT ,并按照通常的方式安排你的case文件 4.Compile your UDRGM C library and build（创建） a shared（共享的） library file (you can use the available compiled UDF utilities in either the graphical(图形) user interface or the text command interface) 5.Load your newly created UDRGM library via the text command menu using the define??user-defined??real-gas?text command. Upon activating the UDRGM, the function library will now supply the fluid material properties for your case. 6.Run your calculation The following limitations?exist for the UDRGM: The user-defined real gas model can only be used with the coupled solvers.（只能使用耦合求解器） The user-defined real gas model assumes that the fluid material is a homogeneous, compressible substance (i.e., multiphase behavior is not taken into account).（多项特性不能使用过UDRGM） Writing the UDRGM C Function Library Creating a UDRGM C function library is reasonably （相当的）straightforward(易懂的); however, your code must make use of specific function names and macros, which will be described in