材控专业英语-4.Plastic_formingprocessanddies讲述.pptVIP

4.9 Magnetic Forming 4.9 Magnetic Forming 芯轴 线圈电流 涡流 4.10 Hydrostatic Extrusion In the process, the billet is forced through the die by means of liquid pressure. At the die opening, on the exit, the pressure is lower than the extrusion pressure, so that a resultant force is exerted on the material by the liquid, forcing it to flow out through the die. 压头位移 推力 压头 模具 产品 4.10 Hydrostatic Extrusion * (3) Friction between the die and the rod. Whenever there is relative motion between two surfaces, there is resistance to this motion, and this resistance is called friction. The mechanics of friction