user requirements template - ispe.DOCVIP

User Requirements Template for a Pure Steam Generator NOTES for use of the User Requirements Template: Upon completion of the template, delete this page prior to updating the Table of Contents and printing. Many areas of this template have selections or tables that have been prepared for guidance and ease of template completion. Text in italics is intended to be used as notes to the User and should be deleted prior to printing. Any options and/or examples that are not applicable to the specific document being created should be deleted as well. To update the final Table of Contents, place the cursor inside the shaded area, press the Right mouse key, and select Update Field. Items that can be directly tested are identified with a (. Where possible, the User should identify the source (e.g. studies, standards, etc.) for the acceptable ranges of variables or other critical requirements that have been derived.  REVISION HISTORY Rev. Date Approval Revision Summary 0.0 May 2001 JWJ Draft updated to new format, numbering and GAMP 3.0 references. Modified to reference as a JETT Sample Doc. 1.0 February 2002 TBD Modified into current URS Template Table of Contents 1.0 Introduction 5 2.0 Overview 5 3.0 Operational Requirements 5 3.1 Functions 5 3.2 Data 6 3.3 Interfaces 6 3.4 Environment 7 4.0 Constraints 7 4.1 Timescales 7 4.2 Equipment Constraints 9 5.0 Life-Cycle 10 5.1 Development 10 5.2 Testing 10 5.3 Delivery 10 5.4 Support 12 6.0 Glossary 13 7.0 References 14 8.0 Approval 15 Project No.: Insert the unique project number associated with this particular URS. Document No.: Insert the Document Identification Number and Revision. Document Description: Insert description of document, e.g. PURE STEAM GENERATOR, JETT Example User Requirements Specification. Introduction Note: Insert your own description and introduction. You may wish to include your own requirements and specifics to allow the inexperienced reader, contractors, and suppli