SWITCH_Final_Exam_CCNPv6.0_2012.doc

SWITCH Final Exam CCNP 6.0 2012 100% 1.Refer to the exhibit. The indicated configuration was established on the HSRP standby router RTB. However, the console message %IP-4-DUPADDR started appearing almost immediately on the RTB router. Given the output of the show standby brief command on RTA, what is the cause of the problem?The command standby preempt should only be applied on the active router.The subnet mask is missing from the standby ip 10.1.1.1 command.The group number 50 is missing in the Router RTB configuration commands.The priority number 150 is missing in the Router RTB configuration commands.The virtual IP address should be the same as the active router.The ports on the switch must be configured with the spanning-tree PortFast feature. 2. Which statement correctly explains the process of mitigating ARP attacks on a switch where dynamic ARP inspection (DAI) has been configured?All intercepted packets that come from untrusted ports are dropped.All intercepted packets that come from trusted ports are sent to untrusted ports only.The intercepted packets are verified against the DHCP snooping binding table for valid IP-to-MAC bindings.For all intercepted packets, an ARP request is sent to the DHCP server for IP-to-MAC address resolution. 3.Refer to the exhibit. What feature does an SNMP manager need to be able to set a parameter on ACSw1?a manager who is using an SNMP string of K44p0uta manager who is using an Inform Request MIBa manager who is using host 192.168.0.5a manager who is using authPriv 4. Which statement is true concerning the core layer within the hierarchical design model?Remote users are granted access to the network through the core.Routing should be configured without traffic filtering, address translation, or other packet manipulation at the core.The core, which acts as the front door to a network, is designed to prevent unauthorized users from gaining entry.The core provides an optimized and reliable transport structure