USP Water System URS.docx

User Requirements Templatefor a USP Water SystemREVISION HISTORYRev.DateApprovalRevision SummaryA103/05/02DraftFormat revisionsA202/27/02DraftDraft for reviewA304/18/02DraftSecond content reviewA408/15/02DraftThird content reviewA509/03/02DraftFourth content reviewA610/10/02DraftGeneral document cleanup following the fourth content reviewB101/24-03MJCValidation ReviewTable of Contents1.0Introduction42.0Overview53.0Operational Requirements63.1Reverse Osmosis Equipment63.2Deionization (Polishing) Equipment63.3Functions73.4Data and Security93.5Environment114.0Constraints134.1Milestones and Timelines134.2Equipment Constraints144.3Compatibility and Support144.4Availability164.5Procedural Constraints164.6Maintenance175.0Life-Cycle175.1Development175.2Testing185.3Delivery185.4Support196.0Glossary217.0References218.0Approval22Project No.:Insert the unique project number associated with this particular URS.Document No.:Insert the Document Identification Number and Revision.Document Description:This document describes the user requirements for a water system designed to produce USP quality water in accordance with the current requirements. This document includes requirements only for reverse osmosis (RO) and post RO polishing utilizing mixed bed deionization. This document assumes that the water supplied to the RO has been appropriately treated based on feedwater characteristics. Note that this document describes a typical water purification regime however; there are various methods of producing USP quality water that should also be considered.IntroductionNote: Insert your own description and introduction. You may wish to include your own requirements and specifics to allow the inexperienced reader, contractors, and suppliers adequate explanation to understand the scope of the equipment.Describe who produced the document, under what authority, and for what purpose.Describe the contractual status of the document. Include or reference as an attachment the “legal” paragraph