[乙烯基酯树脂复合材料工艺品.pptVIP

乙烯基酯树脂复合材料工艺品 汇报人： 组成员： 指导老师： Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 目 录 经济性分析 材料制备方法 材料设计 结构设计 概念设计 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 概念设计 ——设计要求 目标 工艺品 经济性好 造型美观 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 概念设计 ——基体材料的选择 VER UPR VER比UPR 拉伸强度 (Mpa) 60~75 50~70 优 弹性模量 (Mpa) 100-115 90-100 优 剪切强度 (Mpa) 20~30 10~20 优 收缩率 7% 7% 优 耐化学腐蚀性 优 中 优 大致价格（进口） 25 15 稍贵 VER与不饱和聚酯树脂UPR的比较 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 概念设计 ——总体方案 目标工艺品 选择环氧乙烯基酯树脂作为 基体材料，利用丁腈橡胶降 低固化收缩率 加入碳酸钙或白炭黑增强， 增强材料进行表面改性 利用硅橡胶制作模具， 采用浇注成型工艺制备工艺品 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 概念设计 ——创新性介绍 丁腈橡胶与乙烯基酯树脂共混改性，通过相结构的变化来降低树脂的固化收缩率 创新性 选用偶联剂对增强材料进行表面处理，能改善增强材料与树脂的相容性，提高补强效果 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pt