- 2
- 0
- 约5.28万字
- 约 96页
- 2017-01-08 发布于辽宁
- 举报
内蒙古科技大学
本科生毕业设计说明书
题 目:年产60吨硫酸庆大霉素
发酵工段工艺设计
学生姓名:张伟男
学 号:0966121207
专 业:生物工程
班 级:09-2班
指导教师:崔向军 副教授
年产 60 吨硫酸庆大霉素发酵车间工程设计
摘 要
本次设计任务为年产60吨庆大霉素发酵车间工程设计。
本设计采用三级发酵。共有八个发酵罐,两个二级种子罐,两个一级种子罐。采用的生产工艺如下:生产菌种为小单胞菌,经小、中罐种子扩大培养后接到发酵罐中。工艺过程为小—中—大罐三级发酵,小、中罐一次投入。大罐考虑底物抑制及产物营养要求,采用中间补料,包括全料、稀料、氨水、氢氧化钠、消沫油。发酵罐主要设计参数为:公称直径4500mm,罐高11500mm,搅拌器直径为1410mm,筒体壁厚16mm;二级种子罐的主要设计参数:公称直径2400mm,罐高6000mm,搅拌器直径750mm,筒体壁厚9mm;一级种子罐的主要参数:公称直径1400mm,罐高3500mm,搅拌器直径437.5mm,筒体壁厚7mm。设计说明书完成后根据说明书绘制了发酵罐和种子罐的装配图、工艺流程图及厂房布局图。
厂房布局结合实际情况,高15米、长54米、宽17.4米。此外还对环境污染和节省能源方面的设备做了合理的布局,主要工段和设备大部分在厂房内,部分设备在厂房周围。
关键词:硫酸庆大霉素;发酵工艺;罐体参数;厂房布局
Engineering design of the Gentamicin Sulphate fermentation
workshop with the capacity of 60 tons annually
Abstract
The design task was engineering design of the Gentamicin Sulphate fermentation workshop with the capacity of 60 tons annually.
Three levels fermentation was used in this design. There were eight fermentors, two second-grade seed pots and two one-grade seed pots. The production process was followed: producing strains is Micromonospora. After culture expansion of the seeds by the small and mediumcans, they were vaccinated to the fermentors. Three levels fermentation was used in the technological process for the small—medium—big tank. Small and medium tank was put in one time. Intermediate fed was used within the big tank considering of request of substrate inhibition and product nutrition. Intermediate fed include full material, thinner material, ammonia, NaOH, crawl agentfroth oil. The main design parameters of fermenters is: the nominal diameter is 4500mm; the height Is11500mm; the diameter of themixer is 1410mm; the thickness of cylinder wall is 16mm. The main design parameters of second-grade seed pot is: the nominal diameter is 2400mm; the height is 6000mm, the diameter of themixer is 750mm; the thickness of cylinder wall is 9mm. The main design parameters of one-grade seed pot is: the nominal diameter
您可能关注的文档
- 边弯装置液压系统设计--本科毕业设计.doc
- 编可程脉冲信号发生器的设计 --本科毕业设计.doc
- 编可程序控制器sh32r2的电梯控制设计及其监控研究电梯设计--本科毕业设计.doc
- 标目设置在排球垫球技术教学中的应用 体育学院--本科毕业设计.doc
- 边轮式全封闭湿式多盘制动器设计--本科毕业设计.doc
- 波载保护方法应用设计 电力系统继电保护课程设计--本科毕业设计.doc
- 部北湾经济区海洋运输业现状及发展趋势分析--本科毕业设计.doc
- 步异电动机转子磁场定向控制系统仿真研究--本科毕业设计.doc
- 步-测仪的设计说明书--本科毕业设计.doc
- 埠蚌市某综合营业楼中央空调系统设计--本科毕业设计.doc
- 产年100万吨钢坯锭电炉炼钢车间初步设计--本科毕业设计.doc
- 产年63万吨热轧线材车间设计说明书--本科毕业设计.doc
- 产年300吨庆大霉素发酵车间的工艺设计课程设计任务书--本科毕业设计.doc
- 产年120万吨炼铁车间设计 --本科毕业设计.doc
- 产年8万吨合成氨合成工段设计 --本科毕业设计.doc
- 产年300万吨1580热轧板带钢车间工艺设计 --本科毕业设计.doc
- 产年325吨硫酸双氢链霉素生产装置工艺设计 --本科毕业设计.doc
- 产年1000万片头孢氨苄生产车间工艺设计--本科毕业设计.doc
- 产年380万吨炼钢生铁车间或2000立方米高炉设计--本科毕业设计.doc
- 产年490万吨热轧板带钢车间设计 --本科毕业设计.doc
原创力文档

文档评论(0)