类轴零件的一体化设计系统开发--本科毕业设计.docVIP

天津职业技术师范大学 Tianjin University of Technology and Education 毕 业 设 计 专 业： 机械设计制造及其自动化 班级学号： 机自0804 - 09 学生姓名： 黄登春 指导教师： 郭培培 讲师 二〇一二年 六 月 天津职业技术师范大学本科生毕业设计 轴类零件的一体化设计系统开发 Shaft parts of The integrated Design System Development 专业班级：机自0804 学生姓名：黄登春 指导教师：郭培培 讲师 系 别：机械设计制造及其自动化 2012 年 6 月 摘 要 轴是机械设计中应用最为广泛的零件之一，在常规的设计中普遍存在强度、刚度计算过程繁琐，容易出错，且一旦校核不通过，还要重新开始结构设计，重新校核强度、刚度；忽视精度设计，设计者往往不查什么依据，只大约标注，或完全照搬图上的精度，这就很难保证产品的质量和经济性；在轴的设计中．计算和绘图是并行的，这就需要不断地修改图形，过程麻烦，工作量大。因此设计， 本设计旨在开发一个轴类零件一体化辅助设计系统，以Access为底层数据库，采用Visual Basic.NET编程语言，通过在可视化人机界面输入关键设计参数完成轴类零件的Pro/E三维模型的快速生成及修改工作；并可在此设计系统下完成阶梯轴上各段的精度设计，最后实现智能标注。由此只要设计者根据软件提示操作，输入相应的参数，就能使轴的设计、校核化繁为简，完成繁琐的设计计算过程，加快实体模型的生成，提高轴类零件的准确度，减少设计时间，具有一定的实际指导意义。 关键词：一体化；VB.NET；Pro/E；精度设计 ABSTRACT Mechanical design of shaft is the most widely used one of the parts, in the conventional design of widespread strength, stiffness calculation process is tedious, error-prone, and once again began to check is not passed, structure design, to check the intensity, rigidity; neglect of precision design, the design is often not what basis, only about the annotation, or totally copy map accuracy, it is very difficult to ensure the quality of products and the economy; in the design of shafts. The calculation and drawing are parallel, the need to constantly modify the graphics, the process of trouble, workload is big. Therefore the design of shaft parts of the integrated design system, in order to adapt to the design trend of development, improve the efficiency of mechanical design. This design aims to develop an integrated aided design system of shaft parts, taking Access as the underlying database, using Visual Basic.NET programming language, the visualization interface input key design parameters of shaft parts of Pro/E three-dimensional model of rapid generation and modification work; and in this design system to complete