标准件国标号和命名规则STANDARDPARTS(中英对照).docx

标准件常识STANDARD PARTS IN COMMONBY:John.CJ标记含义CODE MEANING□□ □□/□ □□□□-□□□□ M□□×□□ □□ 等 级 GRADE 公称长度 nominal length 公称直径 NOMINAL DIAMETER 米 制 METRIC 发布年份 YEAR OF ISSUE 发布顺序号 RELEASE ORDER NO. 推 荐 RECOMMENDATION 标准类别 STANDARD CATEGORY 零件类别 PARTS TYPE注：标记时，根据需要可能仅列出部分内容。NOTE: When marking, only parts of the content may be listed according to need.E.G 螺栓 GB/T 5781-2000 M12×50 C级BOLT GB/T 5781-2000 M12×50 C GRADE螺栓 GB/T 5781 M12×50BOLT GB/T 5781 M12×50类别TYPE标准代号CODE代号名称CODE NAME备注NOTES螺栓BOLTSGB/T 16674.1-2004六角法兰面螺栓 小系列Hexagon bolts with flange-Small series GB/T 16674.2-2004六角法兰面螺栓 细牙 小系列Hexagon bolts with flange with metric fine pitch thread-Small seriesGB/T 31.1-1988六角头螺杆带孔螺栓 A和B级Hexagon bolts with split pin hole on shank-grade A and BGB/T 32.1-1988 六角头头部带孔螺栓 A和B级Hexagon bolts with wire holes on head-grade A and BGB/T 32.3-1988 六角头头部带孔螺栓 细牙 A和B级Hexagon bolts with wire holes on head--Fine pitch thread-grade A and BGB/T 5782-2000六角头螺栓Hexagon head boltsGB/T 5783-2000六角头螺栓 全螺纹Hexagon head bolts-Full threadGB/T 5785-2000六角头螺栓 细牙Hexagon head bolts with fine pitch threadGB/T 5786-2000六角头螺栓 细牙 全螺纹Hexagon head bolts with fine pitch thread-Full threadGB/T 798-1988活节螺栓Eye boltsGB/T 8-1988方头螺栓C级Square head bolts--Product grade C螺柱STUDSGB899-88 双头螺柱 A型双头螺柱 B型GB901-88等长双头螺柱螺钉SCREWSGB 6560-1986十字槽盘头自攻锁紧螺钉Cross recessed pan head thread forming screwsGB/T 67-2000开槽盘头螺钉Slotted pan head screwsGB/T 68-2000开槽沉头螺钉Slotted countersunk flat head screws(common head style)GB/T 70.1-2000内六角圆柱头螺钉Hexagon socket head cap screwsGB/T 70.3-2000内六角沉头螺钉Hexagon socket countersunk head screwsGB/T 71-1985开槽锥端紧定螺钉Slotted set screws with cone pointGB/T 73-1985开槽平端紧定螺钉Slotted set screws with flat pointGB/T 77-2000内六角平端紧定螺钉Hexagon socket set screws with flat pointGB/T 78-2000内六角锥端紧定螺钉Hexagon socket set screws with cone pointGB/T 818-2000十字槽盘头螺钉Pan head screws with cross recessGB/T 819.1-2000十字槽沉头螺钉:钢4.8级Countersunk flat head screws with cross recess:Steel of property Grade 4.8GB/T 819.2-1997