ppt课件-使用挖掘机泵及管（ useof drager pump tubes）.pptVIP

Use of Drager Pump Tubes Preparation Pump Leak Test Insert unopened tube into the socket Squeeze pump completely and release Pump is adequately leak-proof if the end-of-stroke volume indicator has not appeared after 15 minutes Remove tube from socket Press button to reset counter to zero Preparing the Tube Select tube for the measurement required. Follow instructions for use (tube). Insert tip in opening on the lower pump plate; keep it pressed against the ceramic edge while turning it, so that the glass is scored. Preparing the Tube Pull tube over at an angle until the tip breaks off. Disc