concrete encased duct banksand manholes（混凝土管银行人孔）.docVIP

GENERAL RELATED SECTIONS Section 01 33 00 - Submittal Procedures. Section 01 74 21 – Construction/Demolition Waste Management and Disposal. Section 03 10 00 – Concrete Forming and Accessories. Section 03 20 00 – Concrete Reforcing. Section 03 33 00 – Cast-in-Place Concrete. Section 26 05 00 – Common Work Results - Electrical. Section 26 05 27 – Grounding – Primary. Section 31 23 33.01 - Excavating, Trenching and Backfilling. REFERENCES Canadian Standards Association (CSA), CAN/CSA-A3000, Cementitious Materials Compendium. Includes: CAN/CSA-A5, Portland Cement CSA A23.1/A23.2, Concrete Materials and Methods of Concrete Construction/Methods of Test for Concrete. CSA G30.3, Cold-Drawn Steel Wire for Concrete Reinforcement. CSA G30.5, Welded Steel Wire Fabric for Concrete Reinforcement. CSA-G30.18, Billet-Steel Bars for Concrete Reinforcement. American Society for Testing and Materials (ASTM), ASTM D1056, Specification for Flexible Cellular Materials – Sponge or Expanded Rubber. SUBMITTALS Submit manufacturer’s test data and certification at least 2 weeks prior to commencing work. Submit manufacturer’s information data sheets and instructions. DELIVERY, STORAGE AND HANDLING Deliver, store and handle materials in accordance with Section 01 61 00 – Common Product Requirements. RECORD DRAWINGS Provide record drawings, including details of pipe and duct bank materials, maintenance and operating instructions in accordance with Section 01 78 00 – Closeout Submittals. PRODUCTS PVC DUCTS AND FITTINGS Rigid PVC duct and conduit for exterior underground site lighting circuits and wiring below interior concrete floor slabs, size as indicated to CSA C22.2, with moulded fittings and minimum wall thickness at any point of 2.8 mm. Nominal length: 3 m plus or minus 12 mm. Rigid PVC split ducts as required. Rigid PVC bends, couplings, reducers, bell end fittings, plugs, caps, adaptors same product material as duct, to make complete installation. Rigid PVC 90o and 45o bends.