section054000-cold-formedmetalframing.docVIP

Copyright 2014 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA This Product MasterSpec Section is licensed by ARCOM to ClarkDietrich Building Systems (Licensee). This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec section. Revisions made to the original MasterSpec text are made solely by the Licensee and are not endorsed by, or representative of the opinions of, ARCOM or The American Institute of Architects (AIA). Neither AIA nor ARCOM are liable in any way for such revisions or for the use of this Product MasterSpec Section by any end user. A qualified design professional should review and edit the document to suit project requirements. For more information, contact ClarkDietrich Building Systems, 9100 Centre Pointe Dr., Suite 210, West Chester, OH 45069; Phone: (513) 870-1100; Fax: (513) 870-1300; Website: ; Email: info@. For information about MasterSpec contact ARCOM at (800) 424-5080 or visit www.MasterS. SECTION 054000 - COLD-FORMED METAL FRAMING TIPS: To view non-printing Editors Notes that provide guidance for editing, click on Masterworks/SingleFile Formatting/Toggle/Editors Notes. To read detailed research, technical information about products and materials, and coordination checklists, click on Masterworks/Supporting Information. Revise this Section by deleting and inserting text to meet Project-specific requirements. This Section uses the term Architect. Change this term to match that used to identify the design professional as defined in the General and Supplementary Conditions. Verify that Section titles referenced in this Section are correct for this Projects Specifications; Section titles may have changed. GENERAL RELATED DOCUMENTS Retain or delete this article in all Sections of Project Manual. Drawings and general provisions of the Contract, including General and S