坐标转换参数求取及坐标转换程序设计..doc

毕业设计 设计题目 坐标转换参数求取及坐标转换程序设计 学生姓名 张威 指导教师 杜继亮 专 业 测绘工程 班 级 测绘12-2班 填写日期 2016/4/6 矿业工程学院 摘 要 坐标系统，坐标系统各测量工作目的不同，所选的也会不同，根据不同的求需要将不同的坐标系下的坐标进行相互转换在这些坐标转换的过程中坐标转换模型Visual Basic 6.0编程语言编写程序，用来实现坐标系统 关键字：坐标系统，转换模型，坐标转换 Abstract The base of coordinate system in surveying work. there are many forms and benchmarks in the coordinate system. However, in general engineering, the control point and coordinate. System are the same. So It is necessary to transform the control point. coordinate during the construction process. Due to different purposes of each measurement and the selected. different coordinate references, there will be many different coordinate systems. Coordinate systems used in the measurement work are as follows: WGS-84 World Geodetic System, China Geodetic Coordinate System 2000, National Geodetic Coordinate System 1980, Beijing coordinate system 1954 and Local Coordinate System. There are space rectangular coordinate, geodetic coordinate and plane coordinate in the way of the reference in the same coordinate. According to the requirements of different tasks, we need to convert coordinates under the different coordinate systems. On condition that the coordinates of the reference standard can be obtained. the normal construction work can be done. A lot of coordinate transformation models are used in the process of the coordinate transformation. But the coordinate transformation model is very complex and difficult. Nowadays the conversion formula is suitable for the computerization whose language is easy to learn. So in the design I make use of Visual Basic 6 programming language to realize the transformation between the coordinate system and transformation parameters. Key words : coordinate systems transformation model coordinate transform programming 目录 摘 要 I Abstract II 第1章 绪论 1 1.1研究背景和意义 1 1.2国内外研究现状 1 1.3研究的主