HowtoflashtheBIOS(译)..docVIP

Special Note: 特别注意:The BIOS and DEVICE DRIVERS contained here are exclusively for Micro-Star products only. Micro-Star assumes no responsibility for any damages resulting from improper use or lack of technical expertise. 这个bios和这里的设备驱动程序是微星专用的产品.微星公司说明没有责任为一些由于缺乏专业技能的超作而造成的损失负责. WARNING!!!!! 警告!!!!!:DONT FLASH FROM A FLOPPY DISK!!!!DONT FLASH WHEN YOUR SYSTEM IS RUNNING FINE!!!!DONT FLASH IF YOU DONT KNOW WHAT YOU ARE DOING!!!! 不要从软盘去刷新!!!! 不要在你的系统运行良好是去刷新!!!! 不要刷新如果你不知道要怎么去做时!!!!!Award BIOS Flash Procedure (Special Thanks to Forum Moderator Bas for his valuable contribution) 特别感谢 Moderator Bas 的有价值的贡献1. Check your BIOS for BIOS FLASH DISABLED and ENABLE it, some boards have this function. 检查你的主板里面的“禁止刷新”选项，同时打开次功能，有些主板支持这个功能 For Example: （例） K7N420 Pro (MS-6373) – BIOS setup/Integrated Peripherals/BIOS Protect/Disabled2. Know Your model number 知道你的型号 a. Open your case and look for the MS-XXXX number on the motherboard between the PCI slots, also check the version number that is written there as well. (some motherboards are named like K7T Turbo, make sure you have the right version number) 打开你电脑的主机箱，在主板的PCI插槽中间寻找MS－XXX数字，同时在那个位置也检查一下上面写的版本号（有些主板，如K7 Turo，确定你有正确的版本号） b. Boot up your system take a look at the top left screen during POST, you should see something like “W6373MS v2.1 122101” This means the board is MS-6373 with BIOS version 2.1 启动你的系统，同时在通电自检的期间观察显示屏的左上方，这时你可以看见如“W6373MS v2.1 122101”的文字。这是表示你的主板型号是MS-6373，版本号是2.1 Hint: Many systems are clearing this message very fast, the bios version is then unreadable, you can either press “PAUSE” or disable the “Quick Boot” in the BIOS setup. 提示：很多系统会很快的清除这些信息，以致主板的版本号很难辨认清，你可以通过按PAUSE键或者在BIOS里面禁用“快速启动选项”3. Download the BIOS that matches your motherboard AND version number (some motherboards are named like K7T Turbo, make sure you have the right version number). BIOS can be found according to the CPU type of your board like if your CPU is Intel P4 478 type then look here 下载你同你的主板匹配的BIOS和版本号（有些主板，如K7T