實现低能耗环保的全伺服制瓶机器人.docVIP

实现低能耗环保的全伺服制瓶机器人 　目前国内外玻璃瓶罐机械制造业生产的行列式制瓶机主要为气动和机械凸轮驱动的机器。制瓶过程是一系列的机构和阀门协调动作完成的，机器的动作主要是通过机械阀门或者电磁阀控制气路的通断，从而驱动机构和机械凸轮的运行，有些机构要使用液压缓冲才能稳定运行，有些机构的机械凸轮需要铰链油箱进行油浴。wWW.11665.coM制瓶机上的能量转换首先是把电能经过空压机转换成压缩空气的压缩能，经过对压缩空气的净化处理，通过复杂的气管道输送到制瓶机上，再由气来驱动机构的动作。这种控制方式能源利用率太低，能耗高，噪音大，造成了严重的环境污染，动作稳定性差，结构复杂，运行机速低。开发节能型伺服机构制瓶机，是行业技术进步的需求，更是国家绿色环保和低碳经济的要求。 Glass bottles at home and abroad machinery manufacturing production of determinant bottle blowing machine mainly for pneumatic and mechanical CAM driven machines. Bottle manufacturing process is a series of institutions and coordinated action to complete the valve, the machine movement mainly through mechanical or control pneumatic on-off solenoid valve, thereby driving mechanism and the operation of the mechanical CAM, some institutions to use hydraulic buffer can stable operation, some institutions mechanical CAM need hinge tank for oil bath. WWW.11665.coM the bottle blowing machine energy conversion is the first converted into electrical energy through the air compressor compressed air compression can, through to compressed air purification processing, through complex gas pipeline to the bottle blowing machine, again by air to drive the actions of the organization. This control way too low energy efficiency, energy consumption is high, noise big, caused serious environmental pollution, poor stability, structure complex, run the machine speed is low. Development of energy-saving servo bottle blowing machine, is the industry technology progress requirements, but also a requirement of national green environmental protection and low carbon economy. 　　随着电子信息技术的飞速发展和伺服电机的普及应用，国内外的玻璃瓶罐机械行业相继研制出伺服钳瓶、伺服翻转等制瓶机上的部分伺服机构，取代了老式的气动机构和机械凸轮。这些伺服电动机构驱动的制瓶机具有运行稳定、能耗低、噪音小、污染小、机速高等优点，深受用户欢迎。 With the rapid development of electronic information technology application and popularization of servo motor, the glass bottles of machinery industry at home and abroad have developed servo clamp and turn the servo system, such as bottles on the par