ARM下的红外传感系统设计-[精].docVIP

ARM下的红外传感系统设计 林上玉 (东海科学技术学院 机电工程系，浙江 舟山 316000) 摘要 很早以前人们就已经开始研究红外传感系统。一开始，红外传感以其巨大的优势普遍被使用在军事上。随着红外技术的不断发展，使得红外传感在工业、生活中慢慢的被广泛的使用。ARM微处理器也以其巨大的优势已经在嵌入式领域得到广泛的使用，并且发展也是越来越迅速。红外传感与ARM相结合的应用也逐步被人们所重视。 本文主要介绍基于ARM下的红外传感系统的设计。首先，介绍了ARM微处理器和红外传感相关的知识，其中包括ARM的结构和红外传感系统的工作原理等；其次，介绍了嵌入式实验系统Linux环境的搭建，详细介绍测试环境搭建的操作过程；之后，介绍了红外传感系统应用程序的编写，对一些主要的程序进行说明；最后，介绍了红外传感系统在实验系统上的实现，并说明设计的最后结果。 该设计中最重要的是实践操作。设计中通过在虚拟Linux系统上对应用程序进行编写和编译，然后在QVFB上显示出要求的界面，最后在实验系统上运行编译好的应用程序，得到预期的设计效果。主要的操作有应用程序的编写，Linux系统环境的搭建，交叉环境的搭建，应用程序的测试和烧写。 最后把所完成的包含红外传感系统软件的系统文件烧写到实验系统下，并且执行红外传感系统软件，就会在实验系统的LCD显示器上显示出红外传感系统的界面。安装上红外传感模块后就可以实现红外检测功能，LCD显示器就会根据红外模块上的红外对管之间有无障碍物显示不同的结果。 [关键词]：ARM；Linux；红外传感；嵌入式 Based on the ARM infrared sensor system design Abstract Long time ago people had already started to study infrared sensor system. The beginning, its great advantage infrared sensor are widely used in the military. With the continuous development of infrared technology, Makes infrared sensing in industrial and life slowly is widely used to. The great advantage of its ARM microprocessor embedded in the field has been widely used and development is also increasing rapidly. Infrared sensor combined with ARM applications are gradually being valued by the people. This paper introduces Based on the ARM infrared sensor system design. First, introduced of the ARM microprocessor and infrared sensor-related knowledge, including ARMs structure and infrared sensor system works, etc.; Then, introduced of how to set up experimental systems of the embedded Linux environment, details of test environment set up the operation; After, introduction of the infrared sensor system applications written and procedures for some major shows; Finally, the infrared sensor system to achieve the experimental systems, and describe the design of the final results. The most important is practical operation in this design.in the design of to write and compile the application through the virtual Linux system, then show the expected interf