medical vacuumand gas piping（医疗vacuumand煤气管）.docVIP

SECTION 22 60 00 – medical vacuum and gas piping GENERAL RELATED DOCUMENTS Drawings and general provisions of the Contract, including General Conditions and Division?01 Specification Sections, apply to this Section. Specifications throughout all Divisions of the Project Manual are directly applicable to this Section, and this Section is directly applicable to them. SUMMARY This section includes the furnishing of all labor and materials necessary for complete installation, cleaning, testing and certification of medical vacuum, waste anesthesia gas disposal and gas distribution and monitoring systems, including; piping, inlets, outlets, alarms, valves, supports, labeling, identification and all related accessories. Medical gas systems include Oxygen, Compressed Air, Nitrous Oxide, Carbon Dioxide and Nitrogen. REFERENCE STANDARDS The latest published edition of a reference shall be applicable to this Project unless identified by a specific edition date. All reference amendments adopted prior to the effective date of this Contract shall be applicable to this Project. All materials, installation and workmanship shall comply with the applicable requirements and standards addressed within the following references: NFPA 99 Standard for Health Care Facilities NFPA 70 National Electrical Code ASTM B819 Seamless Copper Tube for Medical Gas Systems AWS A5.8 Brazing Filler Metal CGA V5 Diameter Index Safety System Title 25, Texas Administrative Code, Chapter 133, Hospital Licensing Comply with all Federal and State regulations applicable to this installation. QUALITY ASSURANCE All materials, equipment, installation, testing and certification shall be in strict accordance with NFPA 99 for Level 1 Medical–Surgical Vacuum, WAGD and Gases. Manufacturer’s name and pressure rating shall be permanently marked on valve body. Products of same type shall be by one manufacturer. All valves, valve boxes, inlets, outlets, alarms and associated components shall be supplied by a