燃油管路系统——m d安德森癌症中心.docVIP

SECTION 23 11 13 – fuel oil piping systems GENERAL RELATED DOCUMENTS Drawings and general provisions of the Contract, including General Conditions and Division 01 Specification Sections, apply to this Section. Specifications throughout all Divisions of the Project Manual are directly applicable to this Section, and this Section is directly applicable to them. summary Perform all Work required to provide and install fuel oil piping systems. Provide a complete integrated emergency fuel system for all diesel driven equipment as shown in the Contract Documents. This specification requires system coordination, equipment, installation guidance, programming, startup, training and fuel stabilization treatment to be the responsibility of a single specialized fuel system supplier. This specification section includes Contractor responsibility for all materials, labor, design, code compliance, permits, inspections, piping, specialty components, fuel leak detection, fuel monitoring, and control systems installation. The system shall be in accordance with design standards and shall be designed and built for reliability. Fuel equipment supplier shall be responsible for all field control wire and conduit associated with the fuel system to ensure a fully functional and coordinated system and maintain a single point of system responsibility. Equipment and related material included: Main fuel storage tank(s) and accessories Day tank(s) and accessories Fuel distribution pipe, valves and fittings including automatic tank selection valves and related controls Painting (primer) and above and below grade labels of pipe system Re-Fueling equipment, controls, alarms and related operations Fuel transfer and control from main tank(s) to Day tank(s) Fuel maintenance/filtration system Automatic Tank gauge level and leak monitoring system Fuel piping leak detection sensors and monitoring system Integrated control and monitoring. Control system interface with building management system. C