HTRI资料总结.docVIP

（一）Shell and tube heat exchanger design procedure 管壳式换热器设计步骤1. Identify service (process unit, heat exchanger type as cooler, reboiler, condenser, chiller, steam generator etc.). 定义服务：（工艺设备，换热器如：冷却器，再沸器，冷凝器，深冷器，蒸汽发生器等等） 2. Identify heating medium and cooling medium; 定义加热介质和冷却介质3. Check hot / cold side is heat balance or not? if not, how much differ? less than or equal to 5%, reminder process guy and continue to design; more than 5%, reject process datasheet and stop. 校核热/冷侧是否热平衡？如果不是的话，相差多少？小于等于5%时，工艺计算提示继续设计，超过5%，返回并结束设计。; S3 t1 B f9 a. s2 m4. Is temperature cross? How many e shells in se