Techni的cal report Aiven (BHK Yunda.docVIP

Von: Benny Mei Datum: 2015-05-07 An: Hr. Heitmann Hr. Plautz Fr. Kaiser z.K.: Hr. Brinkmann Ms. Lily Hr. Michel Mr. Jebb Mr. Benny Mr. Bob Mr. Koi Series/Article name Aiven Article no. HK13827S82 Supplier Yun da Project no. 15-151 Description Outdoor lamp Costumer Country Morocco Safety class SKI SKII SKIII Ingress protection IP68 IPX1 IPX2 IPX3 IPX4 Operation Voltage 220-240V AC 50/60Hz 12V Max. Wattage Lampholder Bulb type / LED type Dimmable? Yes No Item is equipped with incandescent bulb halogen bulb ESL bulb Bulb exchangeable Yes No EMC test needed yes no N/A Tilt test 6° 15° fail N/A According to EN60598 table / floor lamps must fulfil the 6° tilt test minimum Material / / Supplier has to fill in the missing data Rated wattage of incl. bulb / LED Luminous output / lm CRI Index ( Ra ) Color Temperature / K Power Factor / cos ? SDCM 6 W lm K cos φ Drop testrequired yes No need Checked and released by the BAG Shenzhen office. passed failed Drop test height= 80cm Drop test sequence Carton base Carton end Carton edge Carton corner BOM is missing fill in CDF data table ( pls. find at the end of this report ) all parts must fulfil the regulations of the REACH pls. provide valid RoHS test reports for all parts which are mentioned inside BOM all touchable plastic parts will be achieve to the rules and limits of the PAH directives waiting for result of temperature test waiting for result of IP68 test waiting for result of endurance test please confirm / comment General: Is there a LVD test report for the whole lamp available? Product size Height 140mm Width 110mm Throat depth 110mm Total weight 0.615kg Front view 0.5J impact test was passed. Please assure the material of the screw and cover are made