ToolsforPCBmillingmachineonhand.docVIP

Info to help you prepare PCB layouts for the milling machine: To have a board milled you have to supply Gerber 274x and drill files: Table of contents 1 To have a board milled, you must 1 2 Milling machine info: 2 3 PCB New (board layout) tips for a successful layout: 3 4 KiCad 4 5 Preparing the files from Eagle. 6 To have a board milled, you must Use on hand drill sizes only (see milling machine info) Have clearances of at least 11mil (see me if you need less) Not have reference designators on the component or solder layer Specify board dimensions (10.8in. by 8in. max.) E