low voltage switchgear- a b b group（低压开关设备- b b组）.docVIP

Low Voltage Switchgear MaxSG Specifications ??? Specification Number: LVSG-1558 Product Name: MaxSG - Low Voltage Metal-Enclosed Drawout Switchgear Section 26. 26 00.11 Low Voltage Metal-Enclosed Drawout Switchgear (MaxSG) GENERAL INFORMATION SUMMARY This specification defines low voltage metal-enclosed switchgear assemblies utilitzing ABB MaxSG Low Voltage Metal-Enclosed Draw-out Switchgear Assemblies constructed to ANSI C37.20.1 standards, UL 1558. Circuit breakers shall be draw-out type ABB Emax circuit breakers with ABB electronic trip units. Circuit breakers shall have interrupting ratings and withstand capabilities to meet system application. Circuit breakers shall be available in 800, 1200, 1600, 2000, 2500, 3200, and 4000?A frame sizes. STANDARDS Switchgear shall be designed, manufactured and tested in accordance with the following: ANSI C37.20.1 – Metal-Enclosed Low Voltage Power Circuit Breaker Switchgear ANSI C37.50 — Test Procedure for Low Voltage AC Power Circuit Breakers Used in Enclosures ANSI C37.51 – Conformance Testing of Metal-Enclosed Low Voltage AC Power Circuit Breaker Switchgear Assemblies UL 1558 – Metal-Enclosed Low Voltage Power Circuit Breaker Switchgear CSA C22.2 No 31 – Switchgear Assemblies Main and Feeder Circuit Breakers used in MaxSG shall be designed, manufactured and tested in accordance with the following: ANSI C37.13 — Low Voltage AC Power Circuit Breakers Used in Enclosures ANSI C37.16 — Preferred Ratings, Related Requirements, and Application for Low Voltage Power Circuit Breakers and AC Power Circuit Protectors ANSI C37.17 — Trip Devices for AC and General Purpose DC Low-Voltage Power Circuit Breakers UL1066 – Low Voltage AC and DC Power Circuit Breakers Used in Enclosures SUBMITTALS – FOR REVIEW AND APPROVAL The following information shall be submitted to the Engineer for review and approval: Table of contents Electrical bill of material General arrangement drawings Single line diagram Nameplate information