【2017年整理】诺基亚交换机常用指令集.docVIP

诺基亚交换机常用指令集 TASK DESCRIPTION AND PURPOSE 任务及其目的 MML-command MML命令 Actions Needed 具体措施 Print out active alarm daily 输出每日告警 ZAHO; (MSCMSS) ZAAP;(MGW) Check if any new alarms exist without acceptable reason. 检查是否有不明 原因的新告警 Try to resolve the alarm by referring Alarm Manual. 根据告警手册消除告警 Three star alarms require immediate user actions. 三星告警需要用户立即处理 Only need to cancel the alarm if the system does not detect the faulty has been corrected. 只能将那些系统不能监测到的告警进行清除 If unable to resolve the alarm, contact Nokia Help Desk. 如果不能解决，向Help Desk 求助 Check Alarm history 检查 告警历史记录 ZAHP; (MSCMSS /MGW) Check the alarm history data, including all alarm events: alarm and cancellations of alarms, disturbances and notices and save in a log file. 检查告警历史数据，包括所有告警事件：告警、告警清除、扰动和通知，并保存成日志文件 Display the alarm history on the basis of the object unit, alarm class, or alarm number, furthermore, you can use the date and time to define the period to be printed out. 可以基于单元，告警级别和告警号码输出告警，也可以定义日期和时间来输出告警 Try to resolve the notices/disturbances by reffering Alarm Manual. 根据告警手册 解决notices/disturbaces If unable to solve the Alarm, contact Nokia Help Desk. 如果无法解决，向Help Desk求助 Check Unit Status 检查单元状况 ZUSI; (MSCMSS /MGW) Check if any Unit is in abnormal state without reason. 检查是否有不明原因的异常状况发生 Not recommend to change unit status by force. 不建议用强制更改单元状态 Diagnose the concerned unit. 诊断相关单元 Change the faulty PIU then diagnose. 更换故障单元板件然后诊断 If unable to solve the problem, contact Nokia Help Desk. 如果无法消除告警，向Help Desk求助 Check association status 检查关联状态 ZOYI::A; 检查association set 和association 的状态. 检查主,备用IP地址是否与信令单元一致. Check VMGW status 检查虚拟MGW状态 ZJGI;(MSS) ZJVI:VID=049;(MGW) 检查VMGW 状态是否正常. 检查 相关的IP地址是否与信令单元一致 Check Trafficability Performance. 检查话务完成情况 ZTUT:SER; (MSC/MSS) Check if “NOT ANSWERED CALLS” is more than 40%. 检查是否无应答呼叫超过40％ If it is more than 40%, check the individual Clear Code groups. 如果无应答 率超过40％，检查每个释放码组 Check if there is huge number for a Clear Code without acceptable reason. 检查是否有大量不明原因的释放码组 Ch