工作研究提高鸿丰机械厂生产效率本科毕业设计.docVIP

中文题目：工作研究提高鸿丰机械厂生产效率 外文题目：WORK STUDY TO IMPROVE PRODUCTIVITY IN HONGFENG MACHINERY FACTORY 毕业设计（论文）共 71 页（其中：外文文献及译文 20页） 图纸共 0张 完成日期 2010年6月 答辩日期 2010年6月 摘要 工业工程的核心是降低成本，提高质量和生产率。工作研究是工业工程体系中最重要的基础技术，其适时运用势必对我国经济又好又快发展起到促进作用。 基于鸿丰机械厂的生产现状，本文运用流程分析、操作分析、动作分析等方法研究手段制定作业标准，并运用工作抽样法和MOD法对部分操作过程进行简单的作业测定，结合“ECRS四大原则”、“5W1H”等工业工程方法论，进行分析改进。 方法研究，运用流程程序分析改进减速器箱体加工的物流过程；运用人机作业分析提高传动轴车削过程人机协作效率；运用双手作业分析提高螺栓组件的组装效率；运用动素分析提高传动轴组件装配效率。作业测定，运用工作抽样方法，对传动齿轮的加工过程进行作业测定，并提出改进措施；运用MOD法，分析小型减速器的装配过程，测定标准时间，减少操作疲劳。 本文运用工作研究包含的方法研究和作业测定两大技术，针对该企业生产过程中的不合理、不规范之处加以分析，提出适当的改进措施，一定程度上提高了生产操作的效率。 关键词：工作研究；现行方法；操作分析；改进；提高效率 ABSTRACT The core of industrial engineering is reducing costs, improving quality and productivity. Work study is the most important basic technology in industrial engineering system, its timely use is bound to sound and rapid development to Chinas economic boost. Based on Hongfeng machinery factory production status，the paper used the process analysis, operation analysis and motion analysis, to develop operating standards. And used work sampling and MOD method, to conduct work measurement on some operations. Combined with ECRS principles, 5W1H industrial engineering methodology to analyze and improve the operation in the enterprise. Method study, used flow process analysis to improve the logistics process of reducer box processing; used man-machine operation analysis to improve the efficiency of man-machine cooperation in transmission shaft turning process and used two-hand process analysis to improve the efficiency of bolt assembly components; used threbligs analysis to improve the efficiency of driveshaft assembly. Work measurement, used work sampling, to conduct work measurement on gear machining process and to put out improvement; used MOD method to analyze small reducer assembly process, for determining standard time and reducing operational fatigue. The paper used two technologies, method study and work measurement, i