Radionetworkplanningprocess培训教程文件.pptVIP

Module 3 – Radio network planning process Module Contents Network Planning Process Approaches to 3G Radio Network Planning Module Contents Network Planning Process Approaches to 3G Radio Network Planning Network Planning Process Radio network planning tasks Dimensioning Include preliminary configuration and coverage capacity planning ? Network configuration (#sites/cells) for coverage and capacity ? Default antenna height for planning area Configuration planning Planning of Node-B and antenna line configuration Calculation of power budget for selected configuration and planned services ? Configuration plan ? Power budget Coverage and capacity planning Cell coverage and load predictions Planning of site locations ? Target site locations ? Cell configurations (antenna heights, azimuths, tilts) Radio network planning tasks Site selection and planning Practical site selection based on target site locations and available sites Site implementation plan ? Actual site locations and implementation plans Parameter planning Initial parameter configuration ? Scrambling code plan, neighbour plan Detailed parameter planning ? Optimised/verified parameter plan Pre-launch optimisation Verification of site coverage and functionality after implementation Post-launch optimisation Continuous monitoring and optimisation task Module Contents Network Planning Process Approaches to 3G Radio Network Planning Approaches to 3G Radio Network Planning There are two fundamental approaches to 3G radio network planning Path loss based approach Can be done by 2G planning tools Results easy to interpret 3G simulation based approach Requires 3G planning tool Requires detailed input information Results large range of network performance information Path loss based 3G planning Path loss based 3G planning is based on Path loss predictions Planning margin and threshold definitions Path loss predictions can be done on 2G or 3G planning tool with 3G site candidate locations 3G site configuration