威力铭MT技术描述和配置.docVIP

附件一: 技术描述和配置 MACHINING CENTRE TYPE 408MT –7 AXES – NUMERICAL CONTROL FANUC 31i A5 408MT型7轴铣车加工中心,配有 FANUC 31iA5数控系统 I. DESCRIPTION AND TECHNICAL DATA I. 描述和技术参数 1 CONSTRUCTION 结构 Frame and main structure casted in spheroidal graphite cast iron, compartmentalized and closed, with ribs, ensuring a perfect static and dynamic behaviour and a great rigidity The frame is isostatically fixed by three points onto the framework, which also holds the tool magazine, the tool changer, the electrical cabinet, the all-round guard and all the other elements. Complete all-round guard with chips wall, ensuring a separation between the machining space and the mechanical compartment of the machine. Safe access to the different spaces with sliding front door, rear and left-hand side doors. Swivelling numerical control director, mounted on the front, fixed on left-hand side of the machine. 带加强筋间隔的铸铁床身，确保优良的静态和动态性能及强的刚性 床身三点均衡的支承在机床钢框架上,同时也支撑着刀具库、换刀器 、电器控制柜、 封闭式防护罩和其他装置 带有切削隔离墙的四周封闭式护罩， 确保了加工区域和机械部分完全分开 打开前边的滑动门、后门和右手边的门可直接安全的到达不同的区域 旋转数控控制器安装在机器前边的左手边位置 LINEAR AXES 直线轴 Longitudinal slide-way X-axis travel 250 mm Transversal slide-way Y-axis travel 200 mm Vertical slide-way Z-axis travel 300 mm Guide-ways set on slides with preloaded cylindric recirculating roller pads, ensuring a super precision class and a high static and dynamic loading capacity Feed control by means of AC motors. Ball-screws ? 25 mm, pitch 10 mm, with preloaded nuts and ball thrust bearings with large contact angle ensuring backlash compensation Max. feedrate : 30 m/min.Thrust : 260 daN Direct measure on X, Y and Z-axes by means of high accuracy scales Resolution: 0.0001 mm （0.1um） X坐标轴水平导轨 行程 250 mm Y坐标轴纵向导轨 行程200 mm Z坐标轴垂直导轨 行程 300 mm 在导轨上装有超精密级预紧的循环滚柱滑枕，确保了高精密度的高静态和动态的承载能力。 棒料进给控制依靠交流发电机 直径 ? 25 mm的滚珠丝杠, 其螺距为10 mm, 带有预紧螺母和滚珠轴承， 其最大接触面确保了间隙补偿。 最大进给量 : 30 m/min.进给力 : 260 daN 高精度光栅尺检测X、Y、Z 轴的精度 分辨率: 0.0001 mm (0.1um)