018企业多层交换网络设计.pptVIP

中等规模园区网络设计 减少路由器之间为稳定性和扩展性而建立的对等关系 通过基于HSRP或VRRP的冗余，进而获得灵活且快速收敛的拓扑主干中的多播和广播的控制能够到任意大型网络规模的可扩展性 中等规模园区网示例 大型园区网设计 大型园区网络 多层园区设计的优势之一是可扩展性。 大型园区网络示例 服务器群组模块中的交换机角色 服务器群组基础设施架构 园区主干层包括能够提供分布层和边缘层之间第3层传输的高端交换机。 服务器群组分布层 部署中高端交换机 使交换和链路完全冗余 服务器群组接入层 最低程度的部署中等规模的交换机. 所有的服务器都采用两块独立的网卡实现双宿. 企业边缘功能区域中的交换机的角色 课程回顾 企业网设计模型 企业多层交换网络设计 * * * * * * * * * * * Purpose: This graphic continues the discussion of Fast Ethernet. Emphasize: Fast Ethernet or 100BaseT is based on CSMA/CD. Fast Ethernet can use existing 10BaseT cabling. Fast Ethernet reduces the duration of time each bit is transmitted by a factor of 10. This enables the packet speed to increase tenfold from 10 Mbps to 100 Mbps. Data can move from 10?Mbps to 100 Mbps without protocol translation or changes to application and networking software. Fast Ethernet also maintains the 10BaseT error control functions as well as the frame format and length. Fast Ethernet can run over UTP and fiber. Transition: The following identifies the equipment requirements for MLS when using an external router. * Purpose: This graphic describes the placement of Gigabit Ethernet in the switch block. Emphasize: The initial applications for Gigabit Ethernet will be for campuses requiring greater bandwidth between routers, switches, hubs and repeaters, and servers. In the early stages, Gigabit Ethernet is not expected to be deployed to the desktop. There are at least four general upgrade scenarios for Gigabit Ethernet: Upgrading switch to server links to obtain high-speed access to application and file servers Upgrading switch to switch connections to obtain 1,000 Mbps pipes between 100/1000 switches Upgrading a switched Fast Ethernet backbone by aggregating Fast Ethernet switches with a Gigabit Ethernet switch or repeater Upgrading a shared FDDI backbone by connecting FDDI concentrators/hubs or Ethernet-to-FDDI routers with Gigabit Ethernet switches In all scenarios, at the desktop, the Network Operating Systems (NOS), applications, and