《反应堆工程设计》作业及答案.docVIP

《反应堆工程设计》课程设计作业题目 题目 试对下面描述的问题进行5000个中子，250次循环的临界计算。 如下图所示，中间黑色部分为Pu 239(100%)圆筒，外围包着的是天然U反射层，初始燃料源处于(3.5, 0, 0)点。 其数据如下： Pu: ρ＝15.8g/cc U: ρ＝18.8g/cc 含量 ：238 99。2745％ 235 0.72％ 2．如下图所示，中间黑色部分为Pu 239(100%)圆筒，外围包着的是天然U反射层, 初始燃料源处于(3.5, 0, 0)点。 其数据如下： Pu: ρ＝15.8g/cc U: ρ＝18.8g/cc 原子百分比 ：238 99.2745％ 235 0.72％ 3. Exercise 3 is a bare (unreflected) UO2F2 solution cylinder.The weight percent of 235U in the uranium is 4.89 %. The solution has a radius of 20.12 cm and a height of 100.0 cm. An aluminum tank with a thickness of 0.1587 cm on the sides and bottom, and a height of 110.0 cm contains the solution. There is no lid on the tank. The region from the top of the solution to the top of the aluminum tank is void. The data for this problem follows: 溶液密度：0.096586 atoms/b-cm 铝密度：2.7g/cc 溶液原子百分比：H1: 5.7058e-2，O8:3.2929e-2， F9: 4.3996e-3， U238 2.0909e-3 U235 1.0889e-4 初始燃料源位置（0 0 50） 4．Exercise 4 consists of two identical U(93.4)O2F2 solution cylinders inside a water tank. Assume the water reflector density is 1 g/cc and has a minimum thickness of 20 cm except on one side of the first cylinder where the thickness is only 10 cm. The height of the water is at the top of the open aluminum containers. The data for this problem is: 初始燃料源位置：（0 0 35），（ 17 0 35） 5．Exercise 5 is a 3x2 array of plutonium nitrate solution cylinders. Plutonium nitrate solution is contained in six stainless steel cylinders with a 10 cm surface separation between tanks. The data for this problem are: 铁，铬，镍的同位素在材料中的原子百分比为： 24050 7.195e-4 24052 1.38589e-2 24053 1.5713e-3 24054 3.903e-4 26056 3.704e-3 26056 5.80869e-2 26057 1.342e-3 26058 1.773e-4 28058 4.432e-3 28060 1.7069-3 28061 7.42-e5 28062 2.363e-4 28064 6.05e-5 初始燃料源位置为： （0 0 19.62） （35.58 0 19.62） （71.16 0 19.62） （0 35.58 19.62）（35.58 35.58 19.62）（71.16 35.58 19.62） 6．Exercise 6 is a hexagonal array of seven open U(93.2% enric