plc在钢卷运输小车控制的应用设计 电气工程与自动化.docVIP

攀枝花学院本科毕业设计（论文） PLC在钢卷运输小车控制的应用设计 学生姓名： 黄 良 梅 学生学号： 200610502302 院（系）： 电气信息工程学院 年级专业： 电气工程与自动化 指导教师： 陶 文 英 副教授 助理指导教师： 二〇一〇年六 摘 要 钢铁工业是一个资金技术密集型基础原料产业 本论文是利用Controllogix系统的PLC来控制钢卷运输小车的运卷，利用传感器来检测位置合小车的高度对中，以及上卷的检测，并结合图形来叙述，简单易懂，而且检测装置也很方便，上卷也很方便，从而保证了钢卷能够准确的送到开卷机上，从而提高了生产效率，也取得了很好的经济效益。 关键词 Controllogix PLC，钢卷小车，高度对中  ABSTRACT Iron and steel industry is a base material between capital-and-technology-intensive industries. With the development of science and technology, automation degree, the original transportation device cant satisfy the needs of highly automated. Reduce labor intensity, guarantee the reliability and safety production, reduce production cost, reduce the pollution of the environment, improve product quality and economic benefit is to be faced with serious problems. However PLC is integrated automatic control technique, measurement technique, and new sensor technology and computer management techniques in an electromechanical products, Make full use of computer technology in production process monitoring and control management and centralized control, Fully absorb the distributed control system and control system of the advantages of using standardized, systematic, modular and flexible, convenient and configuration. This thesis is to use PLC to control the Controllogix system of steel coils transport dolly, use sensors to detect the location of the height of car, and the detection, and roll, easy to figure, but detection device is very convenient, roll very convenient also, so as to ensure the coil winding machine can accurately, thus to improve the production efficiency, also achieved good economic benefits. Keywords Controllogix PLC, steel rolling cart, height centering  目 录 摘 要 I ABSTRACT II 1 绪论 1 1.1 序言 1 1.2 自动控制运输小车的分类 1 1.3 钢卷运输小车的发展 2 2 钢卷运输小车的工艺流程 3 2.1 钢卷运输小车的流程简介 3 2.2 钢卷运输小车 4 2.2.1钢