角片套冷冲压工艺及级进模设计【毕业论文+CAD图纸全套】.doc

摘 要 关键词： Abstract The die by cutting waste stamping, die structure incision, drawing, red pilot hole, drawing guide, cut waste, bending, the cut process design, arranged in a single row of horizontal nesting.And dress design the die structure, the die attached to the lower die part, in order to properly control the feeding step unilateral side of the blade fixed pitch, in the main location pilots to precise positioning.As the material is thin, stamping speed, the discharge may be used in the elastic unloading structure, it is recommended that the elastic material wit