汽车覆盖件左B柱加强板冲压模具设计【毕业论文+CAD图纸全套】.doc

摘 要 本文首先阐述了汽车覆盖件冲压模具数字化技术CAD/CAE/CAM模型的建立，然后以汽车覆盖件左B柱加强板为例，首先对制件进行拉深工艺补充，阐述CAE技术在汽车覆盖件左B柱加强板冲压工艺中的应用，对制件成形性进行模拟分析，能够提前预知成形缺陷，并采取有效措施，定量地给出了拉深成形过程中的工艺参数，为实际生产提供所需参数的参考值。然后利用基于UG的模具CAD/CAM统一系统平台根据汽车覆盖件冲压模具设计制造的基本规范进行模具设计。最后分析并总结了汽车覆盖件冲压模具的加工特点和工艺过程。 模具CAD/CAE/CAM/CAPP的运用能够缩短模具制造周期，减少调试次数。从中可以了解有别于传统的冲压工艺设计的模具制造方式，为今后汽车覆盖件模具开发提供一定的参考。 关键词：汽车覆盖件；CAD/ CAM/CAE；加强板；冲压工艺；调试 ABSTRACT This paper illustrates the status of the mold of computer-aided technologies in supporting the automotive sheet panels stamping die development at first. Then takes the left B strengthen plank of automobile metal sheets as an example, the drawing processing supplement are proceeded. The application of CAE technology in stamping process of the left B strengthen plank of automobile metal sheets was briefly introduced. By analyzing the forming process of the product, partial defects were predicted and then effective measures was taken. The technical parameters ware given quantitatively in the process of drawing which provided a reference to parameters. Then by using UG software, die was designed based on the design and manufacture of dies for automotive sheet panels. At last, analyzed and summarized the manufacturing characters of automobile body metal sheet stamping die. The application of the CAD /CAE/CAM shortened the manufacturing cycle of die and reduced the frequency of trial produce. Form this paper, we realize the difference from the traditional sheet stamping process and die manufacturing method. It provides a lot of experience in die design of the automotive sheet panels. Key words: Automotive Sheet Panels；CAD /CAE/ CAM；Strengthen Plank；Stamping Process；Trial Produce 1 绪 论 1.1 概述 近年来，模具的发展越来越多的被人们所重视，它凝聚了各类高新技术，能快速精密的直接把材料成型、焊接、装配成零部件、组件或产品，其效率、精度、流线、超微型化、节能、环保，以及产品的性能、外观等，都是传统工艺方法所望尘莫及的。一个国家或企业的制造水平和生产能力标志。15%左右的速度增长。2000年我国模具工业的总产值已达280亿元人民币。在模具工业的总产值中，冲压模具约占50%，塑料模具约占33%，压铸模具约占6%，其他各类模具约占11%。 据有关方面预测，模具市场的总体趋热是平稳向上的。同时，由