桥梁滑动式挂篮设计【毕业论文+CAD图纸全套】.doc

摘 要 悬臂施工在大跨度及其他方法难以实施的环境中是经常采用的施工的方法，其中以挂篮为临时结构的悬臂施工技术是重要技术之一。本课题以实际工程为资料，进行优化的菱形挂篮设计。 本论文对悬臂施工技术进行简要说明，并对各种类型挂篮进行比较说明以此选出方案——菱形挂篮，然后根据菱形挂篮设计资料和分析理论进行菱形挂篮的设计和检算。主要内容包括菱形挂篮的模板系统、主桁系统、吊带和锚固系统及走形系统的强度、刚度和安全稳定进行设计和检算。其中利用midas有限元软件进行分部建模设计计算和部分进行手算与之复核，应用计算机辅助软件cad进行整套图纸绘制。 关键词：悬臂施工；菱形挂篮；设计与计算 Bridge?sliding?Wagon?Design Abstract The bracket construction in the great span and other methods implement with difficulty in the environment is the construction method which uses frequently, take hangs the basket as the temporary structure bracket construction technique is one of important technical. This topic take the actual project as a material, carries on optimized the diamond to hang the basket design. This word carries on the briefing to the bracket construction technique, and hangs the basket to each type to carry on the comparison explanation to select the plan diamond by this to hang the basket, then hangs the basket design information and the analysis theory according to the diamond carries on the diamond to hang baskets design and to examine calculated. The primary coverage hangs baskets template system, the main spar system, the suspenders and the anchor system including the diamond and loses shape systems intensity, the rigidity and safe carries on the design stably and examines calculated. And carries on the branch modelling design calculation and the part using the midas finite element software enters the expert to calculate that reexamines with it, carries on whole set blueprint plan using computer auxiliary software cad. Keywords: the bracket construction ；diamond hangs the basket ；design and computatio 主要符号表 K 安全系数 E 材料弹性模量 Φ 安全系数 δp 比例极限 E?拉伸弹性模量δ-0. 2 压缩屈服强度 δb抗拉强度δ-1? 疲劳极限 δN?疲劳强度λ 电导率目 录 1 绪论 1 1.1桥梁挂篮施工的国内外研究情况 1 1.2桥梁挂篮施工种类与特点 3 1.2.1挂篮分类及组成 3 1.2.2挂篮结构的主要特点 6 1.3桥梁挂篮的施工工法及设计安装注意事项 7 1.3.1挂篮的主要组成 7 1.3.2挂篮设计安装注意事项 8 1.4论文的提出与本文的组织 9 1.4.1论文的提出及其本