manualfor3axissmartgoproblgimbal.docVIP

Manual for 3 Axis Smart Gopro BL Gimbal Model: Smart 3 Item name: 3 axis Smart Gopro BL Gimbal Version of Controller:mini3 axis-2.3b5 Total weight of finished goods:262g(without Gopro camera and package weight) Total weight with package: 362g(without Gopro camera) Total height:95.40mm(without loading), suitable for X650 frame, DJI Phantom 1, Phantom 2 Working voltage:9V-12.8V(drive by lipo) Working mode: locks mode, following mode(following mode by defaults) Range of pitch:plus and minus 90 degree( plus and minus 45 degree by defaults) Range of roll:plus and minus 45 degree(plus and minus 45 degree by defaults) Range of contrarotation: 360 degree(360 degree by defaluts) Camera: Gopro3, Gopro3+ Control function: pitch, roll, direction, mode(Maximum occupy idle channels of 4 receivers) Confliguration: DYS Smart3 gimbal frame X1 Load Mount X2 Fixed part for camera X1 M3*6 screw X10 M3*15 isolation pillar X3 M2.5*15 isolation pillar X4 Manual X1 *If voltage more than 12.8V, please step-down by reduction voltage mode. *As the direction shaft without conduction slipring, so the direction cannot rotate 360 degree without limit, if force to rotate, the cable will be twined. We suggest that do not rotate more than 5 circles in the same direction. Alexmos Simple BGC Controler Issues You can Download the GUI for Alexmos here: /downloads/8bit/ To connect the main controller board equipped with an FTDI interface to a PC you will need a USB-to-serial converter and a suitable software driver. For board versions with integrated USB interface you will need a miniUSB cable. For a USB connection youll need to install the appropriate software driver. Depending on your controller, the FTDI chip driver might be /Drivers/VCP.htm, or for the CP2102 chip use The GUI starts in the English version of the user interface. To change the interface language, choose one in the