2-2-3-S103-B004-科研采购规格需求表-附件2.doc-国立中央大学.doc

附件二 本標案所使用之鏡片加工規格表定義如下，共分為球面鏡片規格表與膠合鏡片規格表兩種： 球面鏡片加工規格表示意圖: Lens# Surface# Surface type Radius (mm) TOL (mm) Thickness (mm) TOL(mm) Test1 S1 A C ≦D E F S2 A C ≦D Clear Aperture (mm) (Diameter) TOL (mm) TOL Wage (′) Surface Coating G ≦H ≦I Multi-layer Coating@S1、S2 G ≦H 膠合鏡片加工規格表示意圖: Lens# Surface# Surface type Radius (mm) TOL (mm) Thickness (mm) TOL(mm) S1 A C ≦D E G S2 A C ≦D S3 A C ≦D F H TOL Group Roll of S6 on S7 (mm) J Image System鏡片加工規格: 圖2. Image System鏡組維剖面圖。Image System共包含六片鏡片(G1~G5)，其中G1、G4、G5為塑膠非球面鏡片，G3為膠合玻璃鏡片組，G2則為玻璃球面鏡片。其詳細規格與製造公差如下表格所示。Lens# Surface# Surface type Radius (mm) TOL (mm) Thickness (mm) TOL(mm) G1 S1 Sphere 35.972 ≦0.03 1.50 ±0.01 S2 Asphere 4.151 ≦0.03 Index (Nd) TOL Abbe (V) TOL Surface Irregular (fringe) 1.5369 ±0.001 55.8700 ±0.008% ≦1 @0° direction ≦1 @45° direction Clear Aperture (mm) (Diameter) TOL (mm) TOL Wage (′) Surface Coating 11.850 ≦0.025 ≦3 Multi-layer Coating@S1、S2 8.970 ≦0.025 S2非球面係數與公差範圍: Surface # Parameter Value TOL Surface Error S2 Conic Constant(K) -0.704689 ±0.001 PV≧0.95 (um) 4th Order Coefficient(A) 0 0≧(A)≧-1.854e-06 6th Order Coefficient(B) -2.4033685e-006 0≦(B)≦6.635e-07 8th Order Coefficient(C) 1-007 0≧(C)≧-5.986e-08 10thOrder Coefficient(D) -4.4143121e-009 0≦(D)≦1.822e-09 G2為玻璃球面鏡片，鏡片加工規格與公差如下: Lens# Surface# Surface type Radius (mm) TOL (mm) Thickness (mm) TOL(mm) G2 S3 Sphere 16.427 ≦0.03 2.00 ±0.03 S4 Sphere -46.432 ≦0.03 Index (Nd) TOL Abbe (V) TOL Surface Irregular (fringe) 1.7343 ±0.001 28.10 ±0.008% ≦1 @0° direction ≦1 @45° direction Clear Aperture (mm) (Diameter) TOL (mm) TOL Wage (′) Surface Coating 8.110 ≦0.025 ≦2 Multi-layer Coating@S3、S4 7.750 0.025 G3為膠合玻璃球面鏡片，鏡片加工規格與公差如下: Lens# Surface# Surface type Radius (mm) TOL (mm) Thickness (mm) TOL(mm) G3 S6 Sphere 21.355 ≦0.03 4.00 ±0.03 S7 Sphere 7.283 ≦0.03 S8 Sphere 11.639 ≦0.03 2.00 ±0.03 Index (Nd) TOL Abbe (V) TOL Surface Irregular