NSN_BSC3i2000维护现场培训.ppt

NSN BSC3i2000维护现场培训 新的硬件 New Units: New FTRB-A enhanced fan units CP816-A for all computer units Bit based group switch for 2048 PCMs (GSW2KB) with SW256B plug-in units ET16 for E1/T1 interface ETS2 (STMU unit) for STM-1 or OC-3 interface CLAB-S for clock repeating ESB26 Ethernet Switch Architecture changes Ethernet Message Bus (EMB) LANU 10 + 1 BCSU units (5+1 in basic cabinet) Removed units: MBIF’s Optional Cabling cabinet IC203-A with new E1/T1 balanced ET panels CPETS-E CPETS-F or E1 unbalanced ET panels CPETC-E CPETC-F Cabling panel CPRJ45-A to the BSCC cabinet roof BSC3i2000结构 BSC3i Cartridges in 1st Cabinet (Computer Units) BSC3i Cartridges in 1st Cabinet (Other Units) BSC3i Functional Units in 2nd Cabinet Modularity for scalable capacity steps 1st Cabinet can be equipped up to 1000 TRX 5 x 200 TRX 5 x 200 BTS Sectors (BTS objects) 5 x 200 BTS Sites (BCF objects) 2nd Cabinet to extend capacity up to 2000 TRX 10 x 200 TRX 10 x 200 BTS Sectors (BTS objects) 10 x 200 BTS Sites (BCF objects) FTRB-A (enhanced fan tray unit) BSC3i Processing Unit CP816-A, Pentium III Central Processing Unit Mobile Pentium?III with approx. 1.6 GHz frequency 512 MB SDRAM Provides standard V.24/V.28 based Service Terminal interfaces in front panel The unit is connected to the back plane via CompactPCI bus, SCSI and Ethernet based Message bus one CPCI 33Mhz, 32 bits two Wide Ultra3 SCSI four 10/100/1000 Mbit/s Ethernet ports For all computer units in BSC3i 1000/2000: OMU, MCMU and BCSU BSC3i Group Switch GSW2KB 2048 real PCM’s 16384 virtual PCM’s Switching on 8kbit/s level Max. 65536 8kbit/s channels for one SW256B 8 x SW256B Units 8Mbit/s serial connections towards ET16 via back panel 2 HotLinks / SW256 towards ETS2 via front panel BSC3i clock unit (CLS) Clock and Tone Generator (CL3TG) plug-in units Allows external synchronization input via connector panel Housed in the CLOC-B cartridge BSC3i clock repeater (CLAB) Clock and Alarm Buffer (CLAB-S) plug-in