毕业论文线无通信实践教学模块设计基于d18的调频收音机对讲机系统设计.docVIP

毕业设计（论文） 题 目 无线通信实践教学模块设计—— 基于D1800的调频收音机对讲机系统设计 分 院 信息科学与工程分院 完成日期 2010年月日PCB的设计。在设计时考虑了系统的抗干扰性和电磁兼容性，从元器件的布局及走线等方面来采取措施。 论文设计了一款基于D1800的音频信号处理硬件平台，该平台有接收电路，发送电路，调制电路88MHz—108MHz，工作电源电压为2.5V—5V，信噪比80dB，对讲距离为50—100米。 关键词： 无线通信；硬件系统；音频信号；调频；教学模块； Abstract The emergence of FM radio wireless communications technology is more widely used in the actual system being. The paper introduces FM radio and extensive market, proposed as an FM radio intercom system wireless communication teaching module, and as the idea of university research laboratory material; Students from the teaching modules based on the design of practical control systems of wireless communication series, and stimulating students interest in wireless communications, and enhance the students ability to combine theory with practice; Thus further strengthening the level of the students wireless communications practice to enhance students practical ability, expanding wireless communications market, the wireless communications market to cultivate more professional basis. In this paper, the system completed the schematic and PCB design. Taking into account in the design of anti-jamming systems and electromagnetic compatibility, from the layout and alignment of the components, etc. to take measures. In the paper, one based on D1800 audio signal processing hardware platform, The platform to receive the circuit, sending circuit, modulation circuit, mixer circuit, amplification circuit, oscillation circuit, mainly to receive circuit and the transmitting circuit. The first stage of the system oscillation and amplification circuit, the second stage for the launch of the circuit, FM band is 88MHz-108MHz, operating supply voltage of 2.5V-5V, SNR80dB, intercom distance 50-100 meters. Keywords: wireless communication; hardware systems; audio signal; frequency modulation; teaching modules; 目 录 摘 要 I Abstract II 目 录 III 第1章 概述 1 1.1 无线通信教学实践平台背景 1 1.2 调频收