刀片相关网络技术06_319571_Integrity_BL8x0c_i2_OS_20-Jan-2012.pptxVIP

HP Integrity BL8x0c i2 Server Blades Operating System Installation Rev.12.11 HP Integrity Server Blades L200 Service and Support Module objectives Describe how to prepare a disk for operating system installation Describe how to install the HP-UX operating system on HP Integrity BL8x0c i2 server blades Disk preparation Smart Array Controller modes Internal Smart Array controllers used with Integrity BL8x0c i2 server blades exist in one of two modes: Host Bus Adapter (HBA) mode – Raw SAS mode for non-RAID drives RAID mode – For RAID drives Integrity BL8x0c i2 server blades are shipped with internal disk controllers set to HBA mode Smart Array P410i controller Smart Array P411 controller saupdate.efi – UEFI utility used to query or set the controller mode get_mode – Queries the current controller mode set_mode – Changes the controller mode Syntax:saupdate GET_MODE [ seg:bus:dev:func | all | model ]saupdate SET_MODE [ seg:bus:dev:func | all | model ] [ hba | raid ] [-f] Smart Array controllers should be set to RAID mode before logical drives are created with ORCA After setting a controller to a new mode, run reconnect –r to reset the controllers Viewing/Setting the controller mode View the controller mode Shell saupdate get_mode p410i The controller at 0:2:0:0 is in RAID mode The controller at 0:42:0:0 is in RAID mode Shell Set the controller mode Shell saupdate set_mode 0:42:0:0 hba WARNING: Changing controller mode could result in DATA LOSS!!! Key in YES to continue or NO to quit: YES Changing mode of the controller at 0:42:0:0 to HBA Resetting and reinitializing controller, it may take several minutes Controller mode change successful Shell Shell saupdate set_mode p410i raid WARNING: Changing controller mode could result in DATA LOSS!!! Key in YES to continue or NO to quit: YES The controller at 0:2:0:0 is already in RAID mode Changing mode of the controller at 0:42:0:0 to RAID Resetting and reinitializing controller, it may take several minutes Controller mode