小型为例重物提升机的设计（以履带式起重机）大学学位论文.doc

摘要 关键词: 履带式起重机；结构设计; 三维建模  Abstract This article describes the historical background of the development of domestic crawler cranes, crawler cranes overall analysis of the structure and operation characteristics, focusing on the important parameters related data crawler cranes, hook design, the overall hydraulic decency, track wheel. In this paper, the original crawler crane experimental analysis, and then complete the existing crawler crane mechanism and structural design optimization based on experimental results. The new crawler crane to the original mechanical transmission hydraulic transmission mode; crawler structure used so cranes can adapt to different terrain conditions, to facilitate the work. In this paper, crawler crane 3D modeling analysis, the overall structure is analyzed and improved using a hydraulic device, it can be well used in mechanical engineering. 燛ngineering practice lifting program design still remain in the traditional mode, manually checking mode selection sling, crane selection by referring to the performance table, the use of conventional two-dimensional drawing software AutoCAD and other design lifting processes. This traditional design approach relies heavily on the designers experience, require multiple iterations, long design cycles, not fully before lifting, visualize dynamic lifting process. 營n this context, computer-aided design lifting (CALPAD) technology emerged. Among them, the crane can quickly select the appropriate selection of the crane, and hoisting path planning and simulation can be intuitive and quick lifting process design and preview. However, by comparing the project needs and existing research found that: the application of a wide range of lattice boom crawler cranes less selection; single lifting crane walking path planning is not considered; less simulation of dual-lifting, the conventional method many parameters to be set and it is difficult to determine. Since most existing research projects lack of cons