N79E85J_Tiny_Board_User_Guide v1.pdf

1 N79E85J Tiny Board Quick User Guide v1.0 2011/May/22 2 1. Picture for Tiny Board 2. Keil C51 setting Guide of N79E85J I. Connecting the Tiny Board to PC via USB port, the PC will auto install the driver. II. Install the driver of Keil for N79E85J. Please setup the file to PC “Nuvoton_8051_Keil_uVision_Driver.EXE” N79E85J ICE Chip N79E85J ICE Interface USB I/F RST Key POWER LED P14 LED 3 III. Open the UV4 of Keil C51, please reference below picture of Keil , selects the NUVOTON_85J_Driver. IV. Press the button of “Settings”, the windows will show below picture to set the CONFIG value. 4 V. CONFIG Value setting of Keil C51, after set OK, please press the button of “Write_Config” , the CONFIG value will write to N79E85J. The detail CONFIG setting value, please reference the datasheet. VI. Press the button of “Utilities”, the windows will show below picture 5 VII. Select “NUVOTON_85J Driver” and “Update Target before Debugging” VIII. Press button of “Settings” above picture, the windows will show below picture. Please follow below setting and press OK button. 6 IX. Press button of “OK” to exit Option for Target ‘Target1’ window. X. Press Load icon to download the F/W to N79E87J Download Status Window 7 3. ICE environment of Keil C51 for N79E85J, there are 6 break points. I. Step1, press the “debug” icon II. Step2, ICE mode of Keil C51 for N79E85J Watch Window Source Code Window Disassembly Window Register Window Symbols Window Command Window 8 4. Revision History version Date Section Description v1.0 2011.05.22 Initial version Important Notice Nuvoton Products are neither intended nor warranted for usage in systems or equipment, any malfunction or failure of which may cause loss of human life, bodily injury or severe property damage. Such applications are deemed, “Insecure Usage”. Insecur