ULN2068 1.5A_50V 4路达林顿驱动电路.pdfVIP

Device Operating Temperature Range Package   SEMICONDUCTOR TECHNICAL DATA QUAD 1.5 A DARLINGTON SWITCH ORDERING INFORMATION* ULN2068B TA = 0 to +70°C Plastic DIP B SUFFIX PLASTIC PACKAGE CASE 648C PIN CONNECTIONS Order this document by ULN2068/D K C B Gnd Gnd VS B C C NC B Gnd Gnd B C K 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 *Other options of this ULN2060/2070 series are available *for volume applications. Contact your local Motorola Sales *Representative. 1 MOTOROLA ANALOG IC DEVICE DATA       The ULN2068B is a high–voltage, high–current quad Darlington switch array designed for high current loads, both resistive and reactive, up to 300 W. It is intended for interfacing between low level (TTL, DTL, LS and 5.0 V CMOS) logic families and peripheral loads such as relays, solenoids, dc and stepping motors, multiplexer LED and incandescent displays, heaters, or other high voltage, high current loads. The Motorola ULN2068B is specified with minimum guaranteed breakdown of 50 V and is 100% tested for safe area using an inductive load. It includes integral transient suppression diodes. Use of a predriver stage reduces input current while still allowing the device to switch 1.5 Amps. It is supplied in an improved 16–Pin plastic DIP package with heat sink contact tabs (Pins 4, 5, 12 and 13). A copper alloy lead frame allows maximum power dissipation using standard cooling techniques. The use of the contact tab lead frame facilitates attachment of a DIP heat sink while permitting the use of standard layout and mounting practices. ? TTL, DTL, LS, CMOS Compatible Inputs ? 1.5 A Maximum Output Current ? Low Input Current ? Internal Freewheeling Clamp Diodes ? 100% Inductive Load Tested ? Heat Tab Copper Alloy Lead Frame for Increased Dissipation MAXIMUM RATINGS (TA = 25°C and ratings apply to any one device in the package, unless otherwise noted) Rating Symbol Value Unit Output Voltage VO 50 V Input Voltage (Note 1) VI 15 V Supply Voltage VS