变速器拨叉多工位专用钻床主轴部分及回转工作台设计_毕业论文.docVIP

变速器拨叉多工位专用钻床的设计 [摘要] 组合机床和组合机床自动线是一种专用高效自动化技术装备，目前，由于它仍是大批量机械产品实现高效，高质量和经济性生产的关键装备，因而被广泛应用于汽车，拖拉机，内燃机和压缩机等许多生产领域。其中，特别是汽车工业，是组合机床和自动线最大的用户。 现代组合机床作为机电一体化产品，它是控制，驱动，测量，监控，刀具和机械组件等技术的综合反映。近20年来，这些技术有长足进步，同时作为组合机床主要用户的汽车和内燃机等行业也有很大的变化，其产品市场寿命不断缩短，品种日益增多且质量不断提高。这些因素有力地推动和激励了组合机床和自动线技术的不断发展。 [关键词] 机床 自动化 机电一体化 Transmission fork multi-location special-purpose drilling machine design [Abstract] Combination of automated machine tools and machine tool portfolio is a dedicated high-performance line of automation technology and equipment, at present, it is still a large number of mechanical products for efficient, high-quality and economic production of key equipment, have been widely used in automobiles, tractors, internal combustion engines and many other areas of industrial production. which ,in particular the automotive industry, is the combination of the largest machine tool and automatic line user. Modern tools and automatic line combinations as a mechanical-electrical integration products, such as a comprehensive reflection of technology. Over the past 20 years, these technologies have made considerable progress, at the same time as the main user of combined machine tool and automotive industries, such as internal combustion engines have a lot of changes in the market for there products continue to shorten life expectancy, increasing variety and quality improved. These factors promote and stimulate the combination of machine tools and automatic lines for the continuous development of technology. [Keywords] machine tools automation mechanical-electrical integration  目 录 第1章 绪论…………………………………………………………………………1 1.1 组合机床概述………………………………………………………………1 1.1.1 什么是组合机床……………………………………………………1 1.1.2 组合机床发展现状…………………………………………………1 1.1.3 组合机床的特点……………………………………………………2 1.2 组合机床发展展望…………………………………………………………2 1.3 设计问题的提出……………………………………………………………3 1.4 设计计划安排………………………………………………………………3 第2章 拨叉零件介绍及加工工艺…………………………………………………5 2.1 拨叉零件介绍………………………………………………………………5 2.2 拨叉机械加工工艺路线……………………………………………………5 2.3 零件