MP2480 FOR ACIC.pdfVIP

MP2480 5V―36V Input, 3A High Power LED Driver MP2480 Rev. 1.01 www.MonolithicP 1 1/25/2013 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. ? 2013 MPS. All Rights Reserved. The Future of Analog IC Technology DESCRIPTION The MP2480 is step-down switching regulator that delivers a constant current of up to 3A to high-power LEDs. It integrates a high-side, high-voltage power MOSFET with a current limit of 4.3A. The wide 5V to 36V input range accommodates a variety of step-down applications, making it ideal for general lighting and LCD backlighting applications. Hysteretic current-mode control helps provide for a very fast response, which makes the 20kHz dimming frequency possible. MPS’s proprietary feedback control minimizes the number of external components while delivering an LED current with a typical accuracy of ±3%. The switching frequency goes up to 2MHz, thus permitting smaller components. Thermal shut down, and short circuit protection provide reliable fault-tolerant operation. A 160μA quiescent current allows for use in battery- powered applications. The MP2480 is available in SOIC8-EP with an exposed pad on the bottom. FEATURES ? Wide 5V to 36V Operating Input Range ? Up to 95% Efficiency ? Hysteretic Control with No Compensation ? No Output Capacitor Required ? ±3% LED Current Accuracy ? Up to 2MHz Switching Frequency ? Up to 20kHz Dimming Frequency ? 200mV Reference Voltage ? Short-Circuit Protection with Integrated High-Side MOSFET ? Thermal Shut Down ? Available in SOIC8-EP APPLICATIONS ? High Power LED Driver ? General Lighting and LCD Backlighting ? Constant Current Source All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION A n Cha ng