nomexT410说明书.pdfVIP

1.6 kV/mm (40 V/mil) to minimize the risk of partial discharges (corona). The Full Wave Impulse dielectric strength data of Table I were generated on flat sheets, such as in layer and barrier applications. The geometry of the system has an effect on the actual impulse strength values of the material. The dielectric strength data are typical values and not recommended for design purposes. Design values can be supplied upon request. Temperature has a minor effect on dielectric strength and dielectric constant, as shown in Figure 1. 0 20 40 60 80 100 120 10 30 50 70 90 110 130 0 50 100 150 200 250 300 NOMEX? Type 410 is a calendered insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility and resilience. NOMEX? Type 410 is the original form of NOMEX? paper, and is widely used in a majority of electrical equipment applications. Available in 12 thicknesses (0.05 to 0.76 mm) (2 to 30 mil), NOMEX? Type 410 is used in almost every known electrical sheet insulation application. Please note: The properties in this data sheet are typical, or average values and should not be used as specification limits. Unless otherwise noted, all properties were measured in air under “standard” conditions (in equilibrium at 23?C, 50% relative humidity). Note that, like other products of papermaking technology, NOMEX? papers have somewhat different properties in the papermaking machine direction (MD) compared to the cross direction (XD). In some applications (for example, motor slot liners), it is necessary to orient the paper in the optimum direction to obtain its maximum potential performance. Electrical properties The typical electrical property values for NOMEX? Type 410 paper are shown in Table I. The AC Rapid Rise dielectric strength data of Table I, representing voltage stress levels, withstood 10 to 20 seconds at a frequency of 60 Hz. These values differ from long-term strength potential. DuPont recommends that continuous stresses in transfo