3fne00594A.pdf

[Metric – SI] 3FNE-CO 00-594A December 22, 2005 PURCHASE DESCRIPTION Office Furniture: Sofa; Chair, Easy, Executive, Traditional 1. SCOPE AND CLASSIFICATION 1.1 Scope. This purchase description covers minimum requirements for office furniture, sofa and easy chair furnished certain Government personnel. It describes the minimum quality required by the Government. Construction requirements are in section 3 and figures 1, 2, and 3. 1.2 Classification. 1.2.1 Types and classes. The upholstered pieces shall be of the following types and classes, as specified (see 6.2): Types: Type I - Sofa, three seat Type II - Sofa, two seat Type III - Chair, Easy Classes: Class 1 – Leather Class 2 – Vinyl Class 3 - Fabric 2. APPLICABLE DOCUMENTS 2.1 Government Documents. The following documents, of the issue in effect on date of invitation for bids or request for proposal, form a part of this purchase description to the extent specified herein. Federal Test Method: Standard No. 191 - Federal Standard for Textile Test Methods. Standard No. 311 - Leather, Methods of Sampling and Testing. (Federal Specifications and Federal Test Methods are available, for bidding purposes, from General Services Administration, Business Service Centers in Boston; New York; Philadelphia; Washington, DC; Atlanta; Chicago; Kansas City, MO; Fort Worth; Houston; Denver; Los Angeles; San Francisco; and Seattle WA.) Purchase Descriptions: FNE 80-214A Upholstered Furniture Test Method (Available from GSA-FSS, Furniture Commodity Center, Engineering Division, Washington, DC 20406.) 2.2 Commercial and State Standards and Publications. American National Standards Institute Publications FSC 7110 3FNE-CO 00-594A ANSI/HPVA HP-1 - Standard for Hardwood and Decorative Plywood ANSI/NFPA 260 - Cigarette Ignition Resistance of Components of Upholstered Furniture ANSI/ASQ Z1.4 - Sampling Procedures and Tables for Inspection by Attributes (Application for copies should be