方向盘上盖逆向论文.docVIP

沈阳航空航天大学北方科技学院毕业设计（论文） PAGE  PAGE 65 摘 要 本文主要阐述了运用CATIA等软件的逆向工程技术对汽车方向盘上盖进行逆向建模设计的过程和技术要点。在设计过程中主要运用到CATIA中的数字曲面编辑、快速曲面重构、创成式曲面造型、自由曲面造型及零部件设计等模块。 建模过程中，通过Geomagic Studio软件去掉点云的噪声点，对点云进行补孔、边界等预处理以提高点云的质量，并对点云进行网格化。分析方向盘上盖构形规律,通过CATIA软件，运用拟合自由曲面、桥接曲面、拔模、凹槽、修剪等功能完成了方向盘上盖逆向设计。设计完成后对其结果进行误差分析，所完成的建模误差分析基本符合要求。对该方向盘上盖的制造工艺进行初步分析。 关键词：逆向工程；建模；CATIA；Geomagic Studio；工艺分析 Abstract This article discusses the use of CATIA software such as the reverse engineering of the car steering wheel cover design of the reverse modeling process and key techniques. Mainly used in the design process to CATIA in the number of surface editing, fast surface reconstruction, surface modeling innovation into a style, free-form surface modeling and design of the module components. Modeling process, through the Geomagic Studio software to remove the noise point cloud, point cloud to fill holes on the border and so pretreatment to improve the quality of point cloud, and the point cloud grid. Configuration of the steering wheel above the law, through the CATIA software, the use of fitting the free surface, the bridge surface, the mold, groove, trim steering wheel cover and other functions to complete the reverse design. Design is completed and the results were error analysis, error analysis done by modeling the basic compliance requirements. Steering wheel cover of the preliminary analysis of the manufacturing process. Key words: Reverse Engineering ;Molding ; CATIA ; Geomagic Studio；Process Analysis 目 录 TOC \o 1-3 \h \z \u   HYPERLINK \l _Toc264546917 1 逆向工程技术概述  PAGEREF _Toc264546917 \h 5  HYPERLINK \l _Toc264546918 1.1 逆向工程的定义  PAGEREF _Toc264546918 \h 5  HYPERLINK \l _Toc264546919 1.2 逆向工程的应用  PAGEREF _Toc264546919 \h 6  HYPERLINK \l _Toc264546920 1.3 逆向工程的工作流程  PAGEREF _Toc264546920 \h 7  HYPERLINK \l _Toc264546921 1.4 逆向工程与产品创新  PAGEREF _Toc264546921 \h 9  HYPERLINK \l _Toc264546922 1.4.1 创新设计  PAGEREF _Toc264546922 \h 9  HYPERLINK \l _Toc26454692