基于晶体塑性有限元模型的异步轧制纯铜箔变形行为晶粒统计效应.pdfVIP

Trans. Nonferrous Met. Soc. China 25(2015) 3370−3380 Grain statistics effect on deformation behavior in asymmetric rolling of pure copper foil by crystal plasticity finite element model Shou-dong CHEN1 1 2 , Xiang-hua LIU , Li-zhong LIU 1. State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, China; 2. School of Materials and Metallurgy, Northeastern University, Shenyang 110819, China Received 15 December 2014; accepted 12 May 2015 Abstract: The grain statistics effect was investigated through asymmetric rolling of pure copper foil by a realistic polycrystalline aggregates model and crystal plasticity element finite model. A polycrystalline aggregate model was generated and a crystal plasticity-based finite element model was developed for each grain and the specimen as a whole. The crystal plasticity model itself is rate dependent and accounts for local dissipative hardening effects and the original orientation of each grain was generated based on the orientation distribution function (ODF). The deformation behaviors, including inhomogeneous material flow, decrease of contact press and roll force with the increase of grain size for the constant size of specimens, were studied. It is revealed that when the specimens are composed of only a few grains across thickness, the grains with different sizes, shapes and orientations are unevenly distributed in the specimen and each grain plays a significant role in micro-scale plastic deformation and leads to inhomogeneous deformation and the scatter of experimental and simulation results. The slip system activi