Progress of the BEPCII Linac Commissioning.pptVIP

Pei Guoxifor the BEPCII-Linac Group Institute of High Energy Physics Chinese Academy of Sciences ;The Committee suggests paying particular attention to the following details in 3rdIMAC and our responses;The Committee would like to encourage the BEPC-II team to try to accommodate the full sub-harmonic bunching systems program or at least keep it as a high priority valuable upgrade option. The potential benefit may not only be the slightly increased injection efficiency but these systems may also contribute significantly to providing tolerable condition for the colliding beam detector during top-up operation. It is planning to apply the budget, and may finish the technical design by full 2005, construction in 2006, be measured and RF conditioned in the 1st half 2007 and will be installed in the tunnel in summer 2007. With regard to operations, the Committee would like to mention that a single spare klystron might not be sufficient to provide the high machine availability necessary for the anticipated top-up mode. The Committee suggests to re-assess the probability for system failures based on BEPC-I linac and SLAC linac operations. It is planed to make each 45-50 MW klystron be operated at 35-40 MW output, then two spare klystron may be possible; as a back-up version, one more SLAC-65 MW klystron may be prepared to instead of one 45-50 MW klystron and keep the total 16 klystron constant.;Contents 1. Sub-systems upgrade progress 2. Machine commissioning 3. Problems;1.1 Pre-injector ;200Kv High voltage station ;;Gun controller power supply;; ;Date;Status and plans of SHB system;Beam Dynamics Simulation:;Structure of SHB2 test cavity;Date;Date; DC solenoid;Measured Main Parameters （2004-2005）;Upgrades of all 16 units have been completed.;50KV / 30KW charging power supply;Beam voltage / Beam current / RF output;Improved Beam Voltage Flatness with New PFN Inductor;Beam Voltage Stability;;Prototype Test Result at K9;Phase reference system;Phase and