08-02RadiographicExaminationProcedure射线检验工艺规程教程.doc

HLJXQC Procedures 程序文件Doc. No. 文件号：QCD-08-02Edition 版 本：2012Shop Construction and Field Site Assembly of Power Boilers, External Piping and Pressure Vessels and Parts in accordance with ASME Boiler and Pressure Vessel Code Section I, VIII Division 1 ASME B31.1 按ASME规范第Ⅰ卷、第Ⅷ卷第1分册、ASME B31.1建造和现场安装锅炉、外部管道与压力容器及其部件Revision 修订号：0Radiographic Examination Procedure 射线照相检验工艺规程Page 页码： PAGE 26 of  NUMPAGES 26 Radiographic Examination Procedure 射线照相检验工艺规程 Prepared By编制: Date日期: Reviewed By审核: Date日期: Approved By批准: Date日期: Scope 范围 This procedure is provided for x-ray radiographic examination techniques in accordance with the requirements of ASME Code SectionⅠ, VIII Division 1 , latest applicable edition and addenda. 本规程适用于按照ASME规范第Ⅰ卷、第Ⅷ卷第一分册最新版本及增补的要求进行的X射线检测。 This procedure is intended for examination of the welded joints in ASME Code vessels fabricated with steel. 本规程适用于ASME规范产品钢制容器的对接焊缝。 This procedure shall be supplemented by the examination instruction which defines the variable more specific for the job to be examined. 本规程应由具体详细的检测工艺文件的做补充。 Qualification of NDE Personnel 检测人员资格 Any NDE personnel concerning with this examination shall be qualified as radiographic examiner in accordance with Written Practice for Qualification and Certification of Nondestructive Examination (NDE) Personnel(QCD-08-01), which conforms to the requirements of SNT-TC-1A (2006) and ASME Code SectionⅠ、VIII Division 1 . 从事射线检测的人员必须按本公司《无损检测人员培训考评及认证实施细则》（文件号：QCD-08-01）进行资格评定和认证，此实施细则符合SNT-TC-1A（2006）及ASME规范第Ⅰ卷、第Ⅷ卷第一分册的要求。 Equipment, Tools and Materials 检测设备、器材 Level II examiner shall select the equipment, tools and materials in compliance with the following condition and the requirements of the examination instruction. Ⅱ级人员所选用的设备、器???应能保证符合下列条件和RT工艺卡的要求。 Radiation Source 射线源 One of the following equipment listed in Table 1 shall be used. The effective source size shall be verified and be within the specified limitation. 应选用表1中