多功能单片机8路抢答器.docVIP

东华理工大学毕业论文 摘要  PAGE \* MERGEFORMAT II 摘 要 本文分别从硬件和软件两个介绍了一种采用单片机制作的抢答器的设计思路与功能。该抢答器除了基本的抢答功能之外，还实现其它多种功能。这些附加功能的实现使其在使用过程中更加的方便与智能化。这也符合电子设备的发展步伐。 它在硬件方面主要由AT89SC52单片机、MAX7219显示驱动、LCD显示器组成。除了具有基本的抢答功能之外，还具有定时报警的功能，和数显的功能，当抢答开始后，系统会自动倒计时，并且时间是可以预设的，期间有人抢答的话系统会停止计时，如果期间没人抢答，系统会有短暂的报警，提示抢答结束。 在软件方面主要由程序流程图与部分功能介绍来进行解读。本设计中大部分的较为复杂的逻辑控制，都是用相应的汇编程来控制实现的。通过一系列的汇编程序，来控制、实现相应的逻辑功能。 关键词：抢答器；单片机AT89SC52；时间控制；LCD显示。 东华理工大学毕业论文 ASSTRACT Abstract This paper respectively from two introduces a hardware and software made by single chip microcomputer design ideas and function of the buzzer.The buzzer in addition to the basic vies to answer first function, and other functions.The realization of the function of these additional to make it in use process more convenient and intelligent.This also accord with the development of electronic equipment. It in the aspect of hardware mainly driven by AT89SC52 microcontroller, MAX7219 display, LCD display.In addition to the basic vies to answer first function outside, still have timing alarm function, and the function of the digital display, when the contest began, the system will automatically countdown, and time can be preset, someone vies to answer first during system will stop time, if nobody vies to answer first, during the system will have a brief report to the police, prompt vies to answer first. On software is mainly composed of program flow chart and part function is introduced to interpret.Most of the design of more complex logic control, is done with the corresponding programming to control the implementation.Through a series of assembler, to control and implement corresponding logic functions. Keywords:The Buzzer; Single Chip AT89C52; Duration Control; LCD Display. 东华理工大学毕业论文 目录 目 录 TOC \o 1-3 \h \u   HYPERLINK \l _Toc24661 绪 论  PAGEREF